WS-C3850-24T-S

Cisco 3850 series 24 ports IP Base stackable switch delivers Layer 3 routing features, including OSPF stub, EIGRP stub, RIPv1, v2, PIM stub.

Quick Specs

Figure 1 shows the appearance of Cisco WS-C3850-24T-S.

Table 1 shows the Quick Specs.

Product Details

Figure 2 shows the front panel of the Cisco WS-C3850-24T-S with blank network module.

Note:

(1)Mode button                                             (4)USB Type A storage port

(2)Status LEDs                                             (5)24 * 10/100/1000 Ethernet ports

(3)USB mini-Type B (console) port           (6)Network SFP uplink module slot

·The status LEDs include STAT (status), DUPLX (duplex), SPEED, STACK, SYST (system), ACTV (active) and S-PWR (Stack Power).

·The switch supports one hot-swappable network module that provides uplink ports to connect to other devices. The switch should only be operated with either a network module or a blank module installed.

Figure 3 shows the back panel of the Cisco WS-C3850-24T-S.

Note:

(1)Ground connector                                (5)StackWise port connector

(2)CONSOLE (RJ-45 console port)       (6)StackPower connector

(3)Fan module                                           (7)Power supply modules

(4)MGMT port

Figure 4 shows the StackWise-480 and StackPower connectors.

IP base switches can only stack with other Catalyst 3850 Series IP base, mix stack with LAN base or IP service feature set is not supported.

The Modules, Licenses and Accessories

Table 2 shows some recommended modules,licenses and accessories of this switch.

Switch to Something New

Why Upgrade to Catalyst 9300? | See the Catalyst 9300 Series​

Get more information

Do you have any question about the WS-C3850-24T-S?

Contact us now via or .